Bookmark and Share
Pump Industry

Oil / Gas - 2019 2018 2016 2015 2014 2013 2012 2011 2010 2009 2008

Clark Solutions Boxer Series S gas diaphragm pumps

 Boxer Series S Diaphragm Pump 'push/pull' mounting bracket allows tool-free pump removal/replacement  

Clark Solutions Boxer Series S Gas Diaphragm Pumps provide air/gas pumping efficiency, typically consuming 18 mA for an air flow of 0.8 l/min at 4.5V. Designed to function at temperatures to -20°C (-4°F).

Boxer Series S Pumps are constructed with PPO housings and silicone diaphragms and valves. Models are available with a permanent magnet DC motor (4.5 or 6.5 VDC) or with a core-less motor (6, 9, 12, 18, or 24 VDC).

Boxer Series S Pumps' maximum free flow for gases is 1.8 LPM, maximum vacuum is 300 mbar (225 mmHg), and maximum pressure is 7.25 PSI (500mBar). Potential applications for Boxer Series S Pumps include portable gas detectors, microfluidic dispensing systems, and other sampling devices.

Boxer pumps have the ability to mount the pumps as a 'push fit' into customer equipment. The pump has been designed to fit tightly onto the crank-case lid. The lid in this case acts as a fitting accessory for the pump. Fitting the pump via the lid onto customer equipment allows users to remove or replace the pump without the need of tools. Just push the pump onto the lid and pull it out whenever desired.

This article is featured in:
Oil and Gas

Source: Clark Solutions


Mobile Solutions

© 2006-2018 , All rights reserved.